ROD SEAL KO10

STANDARD SEAL DIMENSIONS

DESCRIPTION

The KO10 seal has small dimensions and has been developed for cylinders used in presence of pressure variation and high speed. The profile has been designed with a shallow groove to ensure tight contact between the static and dynamic part, even in zero pressure situations.

TECHNICAL DATA

Pressure: < 400 bar at a temperature of 60° C
Speed: < 0.5 m/s
Temperature: from – 35° C to + 100° C, with peaks till 110° C
Fluids: mineral oils and fluids

MATERIAL

The proposed

MATERIAL

is polyurethane, with high elasticity modulus, low compression-set and high abrasion resistance. The hardness is 93 Shore A ± 2.

ASSEMBLING

To prevent any damage to the seal, remove any flash and cutting edges in the housing and on the rod. The seal should always be lubricated before

ASSEMBLING

in order to have easier insertion of the rod.